S801+T24N3S
EATON* Actual product may vary from image
Eaton S801+ soft starter, 240 A, T-frame, Three-pole, 24 V power, 200-600 V, 47-63 Hz, 1-2 conductors, #4 AWG to 500 kcmil wire, 120 Vdc, 240 Vac, CIM, Used with: Three-phase motors, Modbus RTU, NEMA 0, LCD display, -30°C to -50°C
Details
MFG PART #:S801+T24N3S
McMc Part #:CUHAS801+T24N3S
UPC #:786685558837
Inventory
$12,957.65 E
Details
MFG PART #:S801+T24N3S
McMc Part #:CUHAS801+T24N3S
UPC #:786685558837
Inventory
Attributes
Features
Resources
Documentation
Attributes
Brand:EATON
Type:Non-Combination Standard Severe Duty T-Frame
Series:S801
Voltage Rating:200 to 600 VAC
Amperage Rating:240 A
Frequency Rating:47 to 63 Hz
Wattage:147 kW
Motor Power:150 hp, 200 hp
Coil Voltage:21.6/26.4 VAC
Number of Poles:3
Timing:0.5 to 18 s
Phase:3
Connection Type:Lug
Overload Relay:Solid-State
Enclosure Type:NEMA 0/IP20
Starting Modes:Current Limit/Ramp
Operating Temperature:-30 to 50 deg C
Dimensions:6.47 x 7.65 x 11.77 in
Features
| Built-in overload protection, run bypass contactor |
| Adjustable ramp times, torque control, kick start control |
| Programmable overload settings, 31 to 100% (3.2:1) of rated current for the unit |
| Physically fits in place of most NEMA and IEC starters |
| Easy to use control interface module, 6 SCRs control |
| Reduced wear on belts, gears, chains, clutches, shafts and bearings |
| Allows for controlling the inrush current to the motor |
| Reduced inrush current leads to more stable power grid and can lower peak demand charges |
| Elimination of water hammer in pumping applications |
| Less shock to product on conveyor lines and material handling gear |