5201-MNET-EGD
ProSoft Technology* Actual product may vary from image
ProSoft Technology 5201-MNET-EGD Gateway, TCP/IP Protocol, 50/60 Hz, RS232/422/485 Interface
Details
MFG PART #:5201-MNET-EGD
McMc Part #:PRTE5201MNETEGD
Inventory
$2,489.00 E
Details
MFG PART #:5201-MNET-EGD
McMc Part #:PRTE5201MNETEGD
Inventory
Attributes
Features
Documentation
Attributes
Brand:ProSoft Technology
Protocol:TCP/IP
Frequency Rating:50/60 Hz
Interface:RS232/422/485
Data Transfer Rate:110/115 kbps
Port Type:DB-9M RS-232/10BASE-T Half Duplex RJ45
Number of Ports:1
Dimensions:5.2 in H x 2.07 in W x 4.52 in D
Environmental Conditions:-4 to 122 deg F Temperature, 5 to 95% Non-Condensing Relative Humidity
Features
| Modbus® TCP/IP to GE ethernet global data |
| The Modbus® TCP/IP driver is a powerful module designed with both client and server support, enabling easy connection to other Modbus® TCP/IP devices (Modicon processors and many others) |
| In combination with the GE ethernet global data device support, the module provides a powerful interface to the many Modbus® TCP/IP devices which are in use in the industrial marketplace today |
| Applications for the moduleare found in most industries, especially manufacturing, oil/gas, electrical power and food processing |
| Internal database - the ProLinx module contains an internal database that consists of areas for application data, status information and configuration information |
| The internal database is shared between all ports on the module and is used as a conduit to pass information from a device on one network to one or more devices on another network |
| Application data area - the data area is used to store-and retrieve data by the protocol drivers and for data exchange between protocols |
| The database is used as a source for write commands to remote devices and holds data collected from the remote devices |
| Commands defined in the configuration file (stored in the configuration data area) control how the data is to be handled in the database |
| Status data area - this area is used to store error codes, counters and port status information for each port |