CMT50002
O-Z/Gedney* Actual product may vary from image
Cable Support, Type Multiple Segment Plug, Compound, Ventilating, Body Type Tapered, Conduit Type Rigid/IMC/EMT, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 5 Inch, Cable Type Non-Armored, Number of Conductors 5 (Different Size), Size 7-1/8 Inch Dia x 5-5/8 Inch H, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Outdoor, Weatherproof Seal, Approval UL 514B, Applicable Standard NEC 300-19, With pOZi-grip R-Style Wedging Plug
Details
MFG PART #:CMT50002
McMc Part #:EGSMCMT50002
UPC #:783126007787
Inventory
$1,669.83 E
Details
MFG PART #:CMT50002
McMc Part #:EGSMCMT50002
UPC #:783126007787
Inventory
Attributes
Features
Documentation
Attributes
Brand:O-Z/Gedney
Type:Type CMT
Size:5 in
Suitable For Use With:Threaded Rigid/IMC/EMT Conduit and Aluminum/Copper Clad Aluminum/Copper/Non-Armored Cable
Specifications:Compound, Ventilating, Tapered, Multiple Segment Plug, 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 kcmil Conductor
Material:Ductile/Malleable Iron
Finish:Hot Dipped Galvanized
Dimensions:7-1/8 in Dia x 5-5/8 in H
Features
| Threaded for rigid conduit and IMC |
| Use with all types of insulations at all voltages |
| This device not only supports the cable, but furnishes a weatherproof seal and provides ventilation at the top of the conduit riser |
| The temperature in a conduit riser can be reduced 8 to 11 deg C (15 to 20 deg F) with proper venting |
| To obtain full effect of this decrease, the lower end of the conduit must be open or vented by use of the conduit ventilators |
| Body only can be ordered separately, for installation prior to wire pulling |
| Plug only can be ordered later, once wires are in place |
| If mounting on a non-metallic/non-grounded conduit, a Lay-In-Lug™ grounding lug should be mounted on cable support body |
| For threadless rigid conduit, threadless IMC or EMT, the body can be attached to the male threads of a setscrew or compression connector |
| For PVC conduit, use a PVC terminal adapter |