71A52A2001D
Advance* Actual product may vary from image
Reliable performance Vacuum-pressure impregnation is used to re-enforce the electrical insulation of the ballast, preclude moisture, inhibit noise, and dissipate heat;Pre-insulated voltage leads reduce the risk of shock and shrink installation time The basic ballast is the open core and coil which is most often used as a component within a lighting luminaire. The core and coil also forms the nucleus of Philips Advance's five other ballast configurations. Vacuum-pressure impregnated with a silica-filled polyester varnish;All core and coil ballasts below 600W utilize a UL Class H (180ºC) insulation system;C and C ballasts 600W and higher utilize a UL Class N (200ºC) insulation system;Pre-insulated voltage leads;Ballast kits supplied with pre-wired ignitor High bay retail, manufacturing, gymnasiums, warehouses, parking structures, outdoor
Details
MFG PART #:71A52A2001D
McMc Part #:ADTR71A52A2001D
UPC #:781087078150
Inventory
$612.50 E
Details
MFG PART #:71A52A2001D
McMc Part #:ADTR71A52A2001D
UPC #:781087078150
Inventory
Attributes
Features
Documentation
Attributes
Brand:Advance
Type:Magnetic
Lamp Type:HID Metal Halide
Lamp Wattage:70 W
Wattage:88 W
Voltage Rating:120/277/347 VAC
Amperage Rating:0.81/0.35/0.28 A
Frequency Rating:60 Hz
Start Type:Pulse
Minimum Starting Temperature:-20 deg F
Power Factor:0.9
Dimmable:No
Number of Lamps:1
Thermal Protection:Class P
Lamp Base Type:71A52A2
Ballast Factor:1
Ballast Grade:ANSI M98/M143
Dimensions:3.95 in L x 2.75 in W x 2.8 in H
Features
The basic ballast is the open core and coil which is most often used as a component within a lighting luminaire |
The core and coil also forms the nucleus of Philips Advance five other ballast configurations |
8 Mfd capacitor |
1.9/0.8/0.65 A input current (open circuit), 0.55/0.25/0.2 A input current (starting), 0.55 to 0.8/0.25 to 0.45/0.2 to 0.35 A input current (short circuit), 0.81/0.35/0.28 A input current (nominal) |
3 x 4 in (2 coil) core |
1-1/4 in Dia x 2-3/4 in H oval capacitor |
Ballast replacement kit with dry film capacitor |
UL insulation class H of 180 deg C |